1st time, day 3, already worried

Hey Community!
Pleadure to be part of you.
I just started my 1st try on last thursday. I put 1x fat banana auto and 1× Blueberry auto seeds on cotton to germinate (pardon my english im french :wink:), both woke up un about 24h. Then i planted them both in smartpots in a tent (40×40×160cm) with carbon filtre and extraction, 1 passive air intraction, and a 30W LED bulb (bloomled). I had to add a heater on the outside, just in front of the air intracter, to get to the right scale of temperature cause the whole thing is in my basement.

My issue is: my moisturizer (is it how you call il english? We say humidificateur) is a cheap one, hardly 500mL capacity, so I have to set an alarm every 3 hour to refill the thing. So of course, as you may imagine there have been some slight fails, like when i have to work, or reaaaaally need to sleep more than 3 hours… :rofl: When i go check (i think max time was like 7h), the relative humidity is around 45% and the temperature 24°C. I found a way to fix it up to like 50% at some point by vaporizing water on the tent’s walls, turning off the air extraction 15min every 3 or 4 hours, but this morning when I went i realize the heater was off, temp was like 16° and like 60%. I bought a way bigger moiturizer online yesterday (but i hope it will fit in the tent, that such a mistake to use 2 seeds, I should have started with one), but I’m worried cause I dont see anything growing, I couldnt even tell you when the plant actually is, there is nothing coming out, and we are day 3… i light them 18h/24 and vaporize strongly the earth every time i go check. Do you think they are having a hard time? Is there anything i can do to check on them?
Cause i still got seeds so if at some point its too late for them, I’d rather start over than lose a few weeks (im not obsessed with quantity, i just want to succeed for now :rofl:)

Thanks a lot!

Lo

Hi @Lomt, welcome to the community! Glad you are a part of it too.
Low temperatures are not good for the plant in the early stages, how much water are you feeding them? Are you spraying around the plant or using direct water to it?
You need to measure the ph if you are using tap water, that could be one issue.
It sounds like a lot of work turning your equipment on and off every couple of hours.
What type of pots are you using?
What is the distance between the lights and the plant?