Truuuuly helping you all can help me out. Hoping to get a quick sanity check from the community based on the attached photo. Setting up my log on Grow with Jane and I want to make sure I’m mapping my meter readings correctly. Based on the attached photo of my VDL 411107 thermo-hygrometer, how should the IN and OUT readings be mapped to the fields in the app (specifically for tracking room ambient vs. inside the tent canopy)?
3 Likes
Welcome to the community @New.Growth85 . I’m not familiar with the sensors, but I’m sure someone with more knowledge about them will get back to you.
3 Likes
You should log IN in the app since it is the temperature inside the tent, as I understood in the Grow with Jane app you can log indoor environment Indoor or outdoor Outdoor according to the plant log, you can record data from outside the tent but I don’t see it as useful.
You should write down indoor temperature and RH humidity, plus height or any other data you’re interested in.
4 Likes
Temperatures and humidity outside the tent are also important. Fresh air comes from outside and brings humidity with it. If the temperature difference is too large, humidity condenses as water droplets inside the tent and runs down the walls, forming puddles. Seen this way, everything has to be in harmony for it to work.
3 Likes
I have a hydrometer in the intake that gives me the temperature of the room where the tent is, what I’m saying is that I don’t write it down in my notebook or in the app, not that it’s not important to keep an eye on it.
3 Likes
Inside and outside temperature readings help me track the difference that lights and equipment at different power levels make to my overall temps as well so i usually track both
3 Likes