Hi, logically they are public on my account. Have you seen my Growlog?
2 Likes
Isn’t there a light snowfall?
As far as I know, only the icebreaker still sails from Rügen… 
Good morning
2 Likes
Hey @ADjahrasta
Sorry, but which Growlog of yours are you referring to? It’s possible I saw it. But I see so much here that I can’t keep track of everything. You’re new here too, right?
I’ve thought about the 25 degrees again.
That was day 20 when I cleaned and refilled the propagator. And the filling temperature was 25 degrees to better stir in and dissolve the Clonex Gel.
In the propagator’s water was an aquarium heating rod that was set. The clones only went back in when the temperature was lower.
That 25-degree statement probably came across wrong. It was only to distribute the Clonex better and not have to wait too long until the heater brought the water to 23.
Put a link to your Growlog here and then I’ll find it and take a look. Many greetings from Paule
4 Likes
@KilliczGe morning morning
Watch out that the icebreaker doesn’t run over your feet. 
I don’t care what’s there!
I want my critters and they’re paid for. Hehehe.
Well, an email just arrived saying they are in Koblenz and would arrive today.
The new tent is also scheduled for today, but the delivery update is missing.
But apart from that, things are chaotic with the post office.
Yesterday an official letter arrived.
The third, as far as I can tell.
The first one from 9.12., replied to with all documents via registered mail with acknowledgment of receipt.
Apparently didn’t arrive.
Tracking says delivered on 3.1. The acknowledgment of receipt for download is just a blank sheet with my tracking number.
No details or confirmation of receipt. Now an inquiry has been filed.
A reminder letter from 7.1 didn’t arrive, which I can also infer from yesterday’s letter.
I can be glad that they haven’t cut off the cash flow and are demanding cooperation for the third time, which should already be done.
No kidding, that’s how it goes.
Very shady stuff, and I love that.
Awesome, now that I’ve activated the Dope Soil, the critters are coming.
Gotta check if anything has warmed up. In 12 days, I want to put the clones into the 20 l fabric pots, into the Dope Soil, and then three Auto Pot.
There are only 2 possibilities with a 10% mix! 
First;
they burn! Dead, broken, bang, boom.
Second; it’ll be awesome! 
Have a nice weekend, I’m mixing the Dope Soil now and putting it back in the bag. Done.
Then I’ll finally finish rolling the frame and then we’ll see.
Greetings from Paule
Addendum; another email.
New tent in delivery and 20 stops removed.
Yeah and then, - gotta check again.
Morning morning
3 Likes
Well, all that grumbling was even worth it if everything is coming today after all.
Just don’t check it so often, I have the same problem. Those tracking things are the worst.
For us and the couriers.
Well then, have fun with the tent 
Cheers
2 Likes
And before the second urge to act is satisfied. Beating the frame ,
I still have to Google today.
On the one hand, yesterday evening, after watering/activating with 10% of the soil volume, I didn’t mix it thoroughly anymore.
So there were still plenty of dry spots in the substrate in the lower area.
Due to the resting period, around 13 months, the whole thing was already quite dry.
Now it’s well mixed, and I’ve added another 1.5 liters of water.
Now it’s back in the bag and is at around 20 / 21 degrees.
The soil itself showed no reaction yet.
It should actually warm up during activation because microbes and fungi then become active. Oh well, after one night, I still need to bring some patience.
One of my weaknesses!
It’s possible that the fungi can no longer be revived. And regarding that, I have to Google. I would have had enough available to introduce them.
First, let’s wait and see what happens in the next three days.
Only if the soil is dead, with the clones in it. Everything goes to trash. I wouldn’t feel like digging up the clones again to go into Dope Light. The bag is fresh, but it should be good for autoflowers, and for light-dependent (plants) for flowering, simply too weak.
Hey my best @KilliczGe
Yep, true about the tracking. That’s why I’m writing to you and then painting.
So I don’t have to constantly look at it.
The nematodes will arrive today from DPD. But with DHL, mmm, you have your experiences.
But the absolute worst is the thing with the registered mail. They state in the tracking that it was delivered on Jan 3rd and provide a blank sheet as a return receipt in the download. So that’s already fraud. And I’m itching to report it. Because someone is lying. Whether it’s the office or DHL.
I paid for a service that apparently wasn’t fulfilled.
And DHL, as always, "it can happen that … "! Experts are looking into the matter. There’s no talk of something just disappearing. It’s always like this.
Alright, let’s see how things go on there.
I’ll continue here now and later I’ll have to copy everything that went out in December again, incurring costs for paper and postage, and here too, an application will follow to the office for compensation for the unnecessarily incurred costs because whoever orders pays. And to top it off, an additional application is attached, stating that I would like a complete copy of my file.
They’ll have to, and they’ll hate it. I don’t care. I also have rights that I need to exercise.
See you later, gotta hit the gas now! Paule
3 Likes
Hey, maybe using a wetting agent should help eliminate dry spots compared to the rest of the pot.
2 Likes
Today was once again a day where the lovely ladies in the tent were left to themselves. Unfortunately no time, but something was done yesterday. So they can also get ready without me.
And tomorrow the little plants will get some water, and those in early bloom too, whereby I’ll surely have to force the Cookie a bit into the net again.
Today, somehow, everything turned out well in the end. But with some action again!
Yay, the fourth door frame is finally finished.
My wife couldn’t stand seeing this old brown junk anymore.
Well, it’s not that easy to turn old into new!
And my wife further planned that we could then paint the bedroom on Tuesday or Wednesday.
You give an inch, and they take a mile.
I knew that the new tent would end up costing me quite a lot.
Yeah, the thing with DHL was quite something again today. For 2 hours, according to tracking, the idiot was supposedly in Greifenberg Street around a few corners, and the 10 stops didn’t decrease.
After work, we wanted to take Gizmo for a walk and drove along that street and in the vicinity.
There was no DHL. When we then drove down the hill to walk Gizmo by the Rhine, he came straight towards me from below. According to the delivery notification, he had already been up the hill for a whole 2 hours.
So they lie to and fool people, and I told that bum today.
It’s strange that the yellow DHL van was standing in front of a light Sprinter, and as I loaded my package into the car, I saw as I drove away that they were reloading there. Somehow strange, as everyone usually drives their routes from the depot.
Shopping was then after the walk for the weekend, and then home.
The box had a few dents, so an inspection was immediately in order.
Some free expanding coco, always good for mixing in! Yeah, and the first plant yo-yos. If a bud is too heavy for the branch, you can hang it.
So at first glance, the content was OK.
The whole thing also seems significantly sturdier than what’s currently standing with the Bubble Gums. Cool that there are even a few more poles included to attach 4 poles to the ceiling instead of 2. I’ll keep the ones from what now has to go.
And so I directly have side reinforcement, and I already have a set anyway.
I wanted to set it up right away. But then it won’t fit through the doors.
Set up only to take down again! Nah, now it’s standing in the corner.
It’ll be more work than I thought.
The old one has to be empty. Then gone. And then it can be set up. The sides are cool. I hope there’s no foil there, and you can also work from the side.
That’s also missing on the big one, and with Scrog in the back area, it makes it difficult to impossible to do anything there.
I think I’ll harvest the Bubble Gums tomorrow. Last watered the day before yesterday, the sensors are now still at 38 and 42%.
10% and more than it was at this time. Clearly shows that they’re hardly taking up anything anymore. They have reached the end. As soon as the light is off, I’ll pull the plug so the light doesn’t even come on tomorrow. And then I’ll cut them in the dark and they’ll go into the Cannatrol, that’ll soon make my head spin again.
Last act for today! Time to roll up a joint supply again and also the Amnesia from tent drying today.
Yeah, the Jamaican from the last harvest also turned out very well. Very tasty on the finish.
Paule wishes you a good evening
5 Likes
So magical and magnificent, what luck to have been in the right place at the right time
4 Likes
Hey guys, beautiful flowers you’re presenting again 
I also have something my glue Gelato
My Mimosa Orange Punch, both from Barneys Farm and automatics
I’ve already trimmed quite a bit
Delicious dry sift, I will press it into Rosin again, quite a bit is still accumulating here are my little ones so, all from the small tent just lollipopped
Autos
Milky way F1 from Royal Queen Seeds
Runtz F1 from Zamnesia
Here’s the direct comparison
Otherwise, Happy grow to everyone 
3 Likes
This is also one of my hobbies, I have an app that shows me solar winds etc., so I know when and where to be for such pictures, these aren’t the first ones 
7 Likes
Hey @Growstarter40
nice pictures.
Wishing the rest of you a nice Sunday. I’m currently taking a cigarette break from the harvest process.
Bubble Gum 2 was relieved of her severe suffering today. And now she lies at my feet for me to remove her last leaves, and I’m performing a wet trim and detaching from the branches directly.
So they go, tray by tray, into the Cannatrol, which already has 2 full trays inside.
Pictures will follow later. But I can already say this:
damn sticky, a great smell, and firm buds - no airy ones.
Whether lady 2 will also be harvested today, I’ll have to see how late it gets, because I also need to go out with Gizmo again and water the others.
In between, one has to instruct one or two people here on what shouldn’t be done. And then they get grumpy!
Just wanted to say hello quickly and now I’m dedicating myself back to the harvest.
Pflanzenpaule wishes you a nice day
6 Likes
Thanks a lot, glad to hear about the buds, firm, sticky, fragrant… sounds fantastic… I still have some time until my next harvest. And remember… ALWAYS DEFY THE
6 Likes
A wonderful good evening and I’m back for today to round off the weekend with the last pictures of Bubble Gum 2 and 1
Lady 1 unfortunately didn’t finish.
One layer of her is in the Cannatrol. De-stemmed and wet-trimmed, that’s already 107 gr. wet buds. The rest hangs whole, upside down in the dark tent. The lamp has already been removed for cleaning and disinfection. Only the smallest fan on the floor and the exhaust on 1 are running until tomorrow, and then more de-stemming and wet-trimming will continue.
Would have liked to have everything finished. The tent out for the new one to go in.
But clean work takes time.
While this won’t be a record harvest quantity this time. But qualitatively awesome.
And for the first time with Bio Bizz fertilizer and the peat-free All Mix and the pests in the 5th week.
Still, in terms of quantity, in the upper range, so I can be satisfied.
Too bad I can’t send the smell.
And here is Lady 2 completely in the Cannatrol in Dry Mode.
Wet-trimmed, de-stemmed, the bud quantity was 467.20 gr. wet.
80 - 90 gr. dry will remain, which is decent for an auto.
A lot of time was already spent on it.
But there’s still room in the Cannatrol, so Lady 1 will fit completely in there too. I set Dry Mode to 5 days, so tomorrow Lady 1 will get 4 more days with it, and then it’s 6 days of Curing.
Lady 1 already has 1 day of drying in the tent then.
Curious to see what her total yield will be.
Now I also need to eat and rest, for tomorrow and new deeds.
I wish you a pleasant night’s rest.
Pflanzenpaule
7 Likes
Hi, I’d be interested in getting information about the model of your Canatrol curing box.
3 Likes
Source: Cannatrol Cool Cure Systems for Home Growers
I hope the link provides you with information.
I even see that there is a latest version of it.
They come from the USA!
Regards from Paule
4 Likes
Is it that late again!
It’s just a circus again. Phone calls today around corners and it turned out that the letter with all documents arrived by registered mail, has been processed, and the lady from the office doesn’t see the note that it’s done. Booh!
One good thing today, the two Bubble Gum are completely trimmed, wet and de-branched, and resting in the Cannatrol.
So in the afternoon I had time to dismantle the old tent to set up the new one. Then came the shock.
More expensive and even shittier than the cheap one from Amaklone.
So I’m sitting here and cancelled the purchase with the main tent dealer by email.
I have a 14-day right of return anyway without needing a reason.
But I’ve provided enough reasons, along with visual material. It’s a good thing I kept the box.
See for yourselves what you get for your money today.
Light protection fabric that doesn’t close light-tight due to poor stitching in the window arch on both sides.
Door bottom right. Lighting opening ??? On the outside, velcro for sticking, but the counterpart on the opposite side is missing!
Yep, and there are more defects. It was advertised as light-tight.
The opposite is the case and worse than the cheap version.
The velcro fastener on the air window bottom left is partly not sewn at all.
Then the light blasts out and also in during the dark phase if there’s light in the room.
So this has nothing to do with being light-tight.
The fabric inside, which is supposed to make the zippers light-tight, bulges downwards into the window arch, instead of lying under the upper fabric. Because it’s sewn incorrectly, crooked, or not sewn at all.
I believe these pictures are enough to illustrate how a grow tent should not be.
For me, Grow Pro represents the absolute last piece of junk.
Tomorrow I will also inform the bank that I have withdrawn from this purchase.
I’m not setting up the old tent anymore either.
Don’t I have a cool exhaust duct
So I had the pleasure of clearing out the corner to scrub it thoroughly and wipe the dust off the duct on top.
With the tents, it’s like this again;
to separate the wheat from the chaff. The interior lining was pretty cool already.
A shiny white, but what’s the use if the rest doesn’t fit?
Now, looking forward to tomorrow. Because I’m not waiting 5 days. Another call will follow tomorrow. They can have it back.
As for the missing seams, something could have been done with the price.
But the defects aren’t just that.
Good night, that was quite a day again. And still at it for a very long time.
Paule
5 Likes
Doesn’t the trim and a few popcorn buds give off a wonderful variety of colors???
There was also some trim scissor hash!
The Bubble Gum’s are now sweating out their water.
Now, in their 2nd week of flowering, the dimmers for the three were set to 75%.
Tomorrow is watering again and some training on the Scrog for the Cookies OG.
And with that, the Plant-Paule goes to rest for the night. Stay High.
8 Likes
that sucks to hear about the tent bud and cleary piss poor workmanship on there behalf. Hopefully no issues with getting your money back. also beautiful plants as always and looking forward to the smoke report. do you enjoy the cannatrol? its pretty pricey over here in the usa but i hear great things said about it. do you use any type of moisture like a wet sponge or does system have a watering tray? or do you simply add cannabis and let it do its thing?
6 Likes
Bro, quick question, is the Taui really worth it for the curing box?
4 Likes