Show off your Ladies

That’s right @Pflanzenpaul

That shows good care :slight_smile:

Chapeau :smiling_face: always great results.

And here are two overall views

Here, some leaves were removed yesterday, so that the air can once again flow up through the layer
And they no longer touch each other as much in the middle
Critical Kush will visibly give good yields, Special Kush 1 is normal, but I’ve also given up, it doesn’t want to go sideways :joy:

Here on the right side are the three autos of the same age.
Wedding Cake seems to have read its schedule on the website and is giving its all from the start :joy:
The rest are doing “normally” ?
Well, they are all healthy anyway.
Whether big or small, it has to be weed

4 Likes

Danke @herr_gruen
Yes, I am also surprised. Something completely different from her mom, who is also getting tastier and tastier.
This resin coating, simply awesome, and I’m still gently stressing them with a little less water over the last few days so they resin even more.
There are still trichome pictures in the Growlog, but somehow the microscope isn’t working properly anymore. I can see it better that way, just heavily zoomed in with my phone.
I disassembled and cleaned the microscope and now I have black spots in the image.
I need to get back to it or get a new one.
I ordered the AC Infinity Hydrone 5 today. The 7 sold out super quickly and was out of stock within a few days and not available until today.
The 5 is supposed to be available at AC Europe (Grow Technologie) from April 29th and shipped from (allegedly) May 1st. That’s a holiday.
I’ll only pay for it when they say it’s there. But I’m already on the pre-order list.
Especially now, when summer starts and the RH rises, it will help enormously.
So far, it’s been lucky, today again RH 37% in the room.
In the tent, they are at 41 - 43% during the day. At night at 49 - 52%.
Optimal for avoiding mold.
Tomorrow I’ll check the trichomes again. I want them at around 10% amber and a lot milky.
Maybe I’ll reach my goal by the end of next week!
Today is day 3 of germination for the 6 new ones. Nothing is showing in the mini pots even by evening. That’s why they are still in the dark.
I already filled the final pots a few days ago.
And today the nursery pots with 2% Living Soil. Because the Hypoaspis miles already arrived today, 6000 in number.
Once all pots were filled and labeled, as there are different strengths of Living Soil and each now has its allocated biotope.
Then the predatory mites were put into each pot after I had lightly re-moistened all the soil pots.
Now predatory mites and nematodes are in there, which ensures me a safe start without pests again.
Everything is now covered again in the tent, and I’m waiting for the new guests!



22 - 23 degrees, that’s already good, and maybe something will show tomorrow.


All I see are pots!

Even before planting, I’m doing great with the colleagues.

All pots were thus colonized, and I still have half a can left. I put a few into the worm bin. Worm humus pest-free! :rofl:

So, everything rests while new life awakens above it.
For the large pots, I left a bit more space at the top for mulching and a top dress if necessary.
As soon as a large LED needs to be on, a little ground cover will be applied. But only a little.
Two rear Auto Pots are already connected. Two Auto Pots will go into the smaller environment.
Thanks to you too @KilliczGe
but yours are also getting better and better. Nice parts in the box. :ok_hand:
Now it’s time to lie down for a bit. The Mexican just hit me on the head.
Good evening everyone!

4 Likes

the Tropicann Banana, the 3 on the right, and the Banana Cream on the left. Today I transplanted from 7l to 11l, added diatomaceous earth and sulfur to the surface, and performed apical pruning (late, very late), but oh well.
I think I’m going to start germinating a Picchu from the Perfect Tree bank, and I’ll leave the rest for the next cultivation along with the ones they gave me at the store: 3 Blue Gelato 41 and 1 Permanent Marker. But they told me that the Picchu is spectacular, I hope so.

3 Likes

Just pictures today

Good evening

4 Likes

I’ll show off the ladies again.

:index_pointing_at_the_viewer:


I’ll just say this.
I already love the Wedding Cake Auto.

IMG_7128




She’s pushing through.

In the other tent





The Critical Kush is entering the last third of its life and gaining nicely.

The Special Kush 1 is developing great, no pollen sacs in sight :magnifying_glass_tilted_right:

Wishing everyone a great Monday :victory_hand:t3::face_blowing_a_kiss:

2 Likes

My follow-up.

The Wedding Cake was just cleared underneath, which really wasn’t much work since the growth is enormously open and almost nothing grew underneath.

So I spread her out a bit more. Now she can absorb the full sun.






:smiling_face_with_sunglasses:

6 Likes

I love your plant, it’s one of those magazine-perfect plants, very beautiful.

4 Likes

After 41 long hours, the picchu has germinated! I’m so eager to see it grow.

On the other hand, I have a massive problem with the temperature; I have no idea how to solve it, I have to think it through… It turns out the tent reached 33ºC today, yes yes, 33…
For now, I placed an extra powerful fan that stirs the lower-middle zone, another small one pushing from below towards the LEDs, and another corner one that keeps moving the air up.
But it doesn’t help much; the real problem is that it’s in a gallery that has the same width as the tent, and I thought perfect! But of course, now that the heat has arrived, and the light hits the large window… that window gets very hot… it even burns the aluminum frame.
It’s what I call a huge pain.
The landlord won’t let me install awnings, and I’m on a 4th floor; for now, I can’t think of anything at all.

5 Likes

@3xt3nd3d

Many thanks

The truth is, I haven’t done much.
I’ve only removed some large leaves from the top from time to time. And now I’ve untied them a little. Just a little. The rest she has done on her own.
See you later :face_blowing_a_kiss::victory_hand:t3:

3 Likes

Hey Grow friends, I’m here and I hope you all had an exciting day!
Today I first had to cancel the dentist appointment for tomorrow.
I have to drive my daughter tomorrow.
For registration and then to pick up her new car.
And then, after today’s Cookies OG clone pictures.
Flowering day 56,
out of 60 - 65 flowering days according to the Breeder.

They are finishing faster than stated.

There was also a microscope dilemma.
The best one broke and a new one that arrived today turned out to be unsuitable, so it’s going straight back tomorrow.
Clone 1;





Clone 2




That’s so brutally awesome.
You can’t even see the bud anymore because of all the resin! :rofl:



A little more of the surroundings! Wonderful.
The only thing was that the trichomes were difficult to assess without a microscope.
In a pinch, I found a phone microscope that I re-equipped with batteries.
Although it didn’t show me giant trichomes, it made them easier to evaluate.





That made it clear to me;
Based on the new pictures, I estimate the proportion of amber trichomes to be currently around 5% to a maximum of 10%.
This is exactly the point where the plant signals that it has reached its maximum maturity and the “harvest window” is officially open.
This means:
The “Sweet Spot”:
Since it’s only at about 5–10% amber, the lady has reached maximum THC. The remaining trichomes are mostly milky. For most growers, this is the preferred time for a harvest with high, but still “clear” potency.
Tomorrow evening after lights out, I’ll pull the plug and harvest the day after tomorrow, without them being lit again.
By then, the amber percentage could have grown to 15-20%. Then it will be a very nice potent product.
Tomorrow, I’ll start up the Cannatrol again and remove some leaves from the ladies.
And it continues!
Day 5 germination today, the Mexican Sativa showed itself early in the morning.

Wow, and already so vigorous.
Throughout the day, things continued.
The Amnesia Skittlez Auto

Followed by the Wedding Cake Auto
(Torti)

which are currently struggling out of the soil, making it 3 out of 6 beans already.
And there’s a fourth, which is currently presenting an insane birth.
The Sour Diesel.
Although nothing is visible above ground.
In the morning, the Easy Start Plug appeared 1 cm lifted out of the peat.
Carefully I pulled on it and saw a thick root.
So I pushed it back in, flush with the peat.

Maybe not 100%.
Then the tormenting thought occurred to me.
To avoid an air bubble in the soil, at the root.
Possibly having damaged it with the process.
Then in the afternoon, the damn Easy Start Plug started to grow out of the peat again.
Upwards.

The head hasn’t made it out yet, but the root is lifting the entire plug. :joy:
That’s awesome. Never experienced anything like it.
So, there’s life in 4 out of 6 beans.
Let’s see what tomorrow brings.
The mini LED in the grow house is lit, and for the first time, it’s running 24/7.
With that, I say, have fun growing and a good evening. Greetings from Pflanzenpaule

4 Likes

Wishing you a wonderful day, and I’m already stressed with preparations again, and incidentally I’m getting annoyed where there are no more teeth.
But first things first.
This junk microscope that arrived yesterday went back today, and the money was credited back in no time.
So, I ordered a different one. That one will arrive on Thursday and is similar to the one that broke on me. I found that one quite good so far.
For the other one, the description stated that the best results are achieved at 1 cm distance.
But there was no image, and it only appeared with direct contact.
Now try placing the lens on trichomes two or three times. I can do without that mess. Oh well, it was another experience.
Today is the last day for the clones, and they are now at 24.5 Grad. For some time now, it hasn’t gone above 25 Grad.
The humidity is around 39 - 43 %. Since the water quantities decreased, it no longer goes above 50 % at night in the dark.
Exactly what I wanted.
At 9 PM the light goes out, and then I’ll pull the plug so it stays a cool 18 - 19 Grad and dark tomorrow morning.
As soon as the Gizmo round is finished tomorrow morning. I will separate the clones from their roots. Remove the last leaves and delicately wet trim them to put both into the Cannatrol.
It just started, and I’ve set the settings close to the factory defaults. This time, they will be dried at 19.5 Grad with 62 % humidity, a dew point of 12.1 Grad, for a duration of 4 days.
I’ve set the Cure Mode to 8 days; extending it is always possible, and here the temperature gently drops to 19.2 Grad with 61 % humidity and a dew point of 11.6 Grad.
Then there was a small inspection in the Baby Room!
The Sour Diesel is quite stubborn. Again, its Easy Start was almost completely lifted out of the peat. It somehow manages not to come out of the soil at the top, spins around its own axis in the soil, and the root lifts the entire soil block up. After helping it yesterday, I thought I had damaged the delicate root. But that very root is still raging in the soil. Otherwise, the Easy Start wouldn’t have been so high again today.


That’s how it looked again in the morning.

I had to intervene to save a life.
Now the day is coming to an end.
So, a few more hours have passed. I had my way with her :rofl:
And I think;
now the Sour Diesel is on track on Day 6.


The Easy Start didn’t lift itself anymore, but the cotyledons have found their way from the dark into the light.
4 out of 6 are there, and the Mexican Sativa is already stretching out a lot. Its root also already came out of the bottom of the pot. Since the pots are on Perlite, I moistened it again, and tomorrow I have to transplant them into the 2 % living Soil propagation pot.
Then all of them and the big lamp on. But first, only one lamp.
What makes me suspicious is that the Bubblegum Gelato is not showing itself.
I carefully looked into the soil.
It will come, because its root has sprouted from the seed.
Only the Kalini Asia from Zamnesia remains.
There it still lies, just the seed.
No bursting open was visible.
Mmh, gives me strange thoughts.
Already the order and payment process, on their part, couldn’t be topped in terms of stupidity.
Now, should the first of their seeds also be a dud?
It can’t be due to my inability, because 5 out of 6 have germinated. Only theirs hasn’t so far. All pots, the soil in them, have the same moisture.
Then I also have to say;
This organization is endlessly annoying.
Unsubscribed newsletters and still emails non-stop.
One cannot cultivate so much of what they want to push on you.
All the nice gifts, but first you have to buy for at least [a certain amount].
Well, luckily there are some where things run normally.
After quite a few experiences with them, it would be the ultimate annoyance if the seed doesn’t germinate at all. But then I will contact them.
It annoys me that they have been bombarding me with emails for some time, even though I unsubscribed.
A precarious situation now. If I wait longer, I lose time.
If I plant the next one of these beans, I might end up with 2 and then no more space.
I’ll wait until tomorrow and then I have to decide.
One can already see more of the Amnesia Skittlez today.

The Mexican Sativa is already stretching quite a bit.

And Torti, the Wedding Cake, is also showing more today.

That’s the foremost one.
In the next pot, they will then be planted deeply, up to the cotyledons.
With tomatoes, it’s like that: new roots grow everywhere on the stem below the cotyledons when it’s in soil. It should be the same here then.
I hope that now that the Sour Diesel has found its way, it won’t lift the soil anymore. I find it amazing what power such a root can develop.
Tomorrow will be a long day. There are many, many Cookies OG flowers coming in for drying. Clean and disinfect the small tent so I can bring in the hose and connect the 2 Auto Pot systems.
That would mean 2 fewer of the 20 l fabric pots in environment 1.
Wonderful, and soon there will be strawberry cake galore again.
20260428_181724

20260428_181700
Apparently, things are also going great in the worm bin.
Great climate!
The worms are multiplying nicely already.
I’ve even got a second tier up and running.
Good evening, wishes Pflanzenpaule

6 Likes

My bubblegum gelato was a problem at germination time as well. It was the longest time I have ever waited for a seed to sprout taking a total of 16 days to break the surface. I had almost given up on it completely by the time it came up.

6 Likes

Awesome @Crackadoo
I would have already disposed of the peat and the bean.
16 days! The others are almost going into flower. :rofl:
I’m used to seeing seedlings in about 5, 6 days.
The biggest one is already 6 cm and there’s nothing to see from the Bubblegum yet. Also not the Kalini Asia.
But thanks for the info.
I’ll continue to practice patience.
The first 4 are going into the larger seedling pots today.
Best regards

4 Likes

I took out my camera the other day and took a few “high-gloss” shots.

The lighting conditions are well illuminated, but I think there’s still room for improvement.

Here are two of them, after the final processing of the raw data.


I still need to practice a bit :wink:

Greetings :vulcan_salute:

Edit:

Practiced a bit with the old subject of aperture and ISO, and lo and behold, while my own standards are always set highest, it’s getting there.

Wedding cake Auto


Critical Kush



:drooling_face:

3 Likes

Here are a few pictures from me

The Fat Gorilla

Pink Runtz

Sherbet Queen

Green Gelato

20260429_123257at the moment they show no deficiencies

the tent is filling up and all are at the same height

the Royal Runtz

is also thriving beautifully

I have already topped them, now it’s time to prepare new colloidal silver water.

Have a nice day everyone

5 Likes

And it was also trimmed today.
A little over 50 g grape soda automatic


Enjoy! :dodo::dashing_away:

7 Likes





TheZe R Nr.7s from OaSeeDs :slight_smile: :grin:
Plus da 5 month old scienCe experiment’

Veganic, homeMade soil, bugs, critters, outdoors witt an indoor booSt once or twice at night :first_quarter_moon:
every 4 dayz

Da OaSeeds r 5 days in :wolf:

3 Likes

Holla @KilliczGe
That one needs to come out, I’ll get to the rest tomorrow.
It was a lot today.
Your bud is as big as my

4 Likes

:rofl::rofl::rofl::rofl: treetrunk​:rofl::rofl::rofl::rofl:

4 Likes

Good morning - friends of heavenly hemp.
After a restful night, everyday life has me back.
Oh dear!
Yesterday was another damn long day.
It was already 8 PM when I couldn’t be bothered anymore.
Then there was the repotting of all 6 mini pots. Which were clearly too mini.
And then to manage this sea of flowers.
Although some of Clone 1 has already been defoliated, the flowers separated from branches, and wet-trimmed, residing in the Cannatrol. There is still so much of it.






I’ve set the Cannatrol from 4 to 5 days Dry Mode and instead of the wet sponge, fresh vegetables are simply added today.
To speed up the loading, I’m unpacking the Trimm Bowl today and running the upper, fat buds through it.
It makes it a bit more complicated because I also want a clean trim.
I meticulously cut away the dried leaf tips because I don’t want them in the trim.
Yesterday, I already separated the stems of the clones from the root in the cool dark, and they are now hanging dead in the net at 19 degrees and 57% RH.
This time, a brutal amount is coming together.
It’s hard to believe how hard, dense, firm the flowers are.
It’s quite possible that I’ll hit 1000g wet today with the 2 clones.
For repotting, it was clear to me that the seedlings no longer fit into the mini greenhouse and the pots would then stand open in the tent.
So, the humidifier had to be started to maintain 75% RH.
The lamps were set to a remarkable 140 cm distance.
When dimmed to 24%, a good 114 to 117 micromols reached the top edge of the propagation pots.
To not immediately cause light stress, that’s good for now.
The first week should be 100 - 200 micromols and from week 2 then 100 - 300 micromols.
The values were measured with the tent almost closed.
Just open enough to take photos.


However, I already raised the dimmers to 25% earlier.
Next week, it should be 300 micromols.


That shows the reason for repotting.
The root of the Amnesia Skittlez!
Now I’m doing the second round with Gizmo.
And then there’s a lot to do again.
Almost too much.
Stay High and have a nice sunny day

4 Likes